Hi, this is harry from beginnerlink. today I gonna show you (how to mine bitcoin) professionally and profitably. every blocks you mine you get 6.75 BTC rewards. 6.75 BTC convert to 36413.20 USD.
Welcome to the multi-billion-dollar industry of cryptocurrency mining! Bitcoin was the first decentralized cryptocurrency and has an unprecedented reputation that has spawned numerous copies and innovations. It remains the largest cryptocurrency by market capitalization to this day. It singlehandedly created the blockchain industry and has had a profound influence since its creation.
Founded in 2013, f2pool was one of the earliest Bitcoin mining pools. Use this comprehensive mining guide to kickstart your mining career and help secure the largest decentralized network with us!
What is Bitcoin mining?
On October 31, 2008, a programmer using the pseudonym of Satoshi Nakamoto released a document called “Bitcoin: A Peer-to-Peer Electronic Cash System”—the Bitcoin whitepaper.
On January 3, 2009, Bitcoin’s genesis block was mined. This marked the birth of cryptocurrency, a trustless form of currency with no centralized governing body.
Bitcoin uses a distributed ledger to maintain the balances of every user. Each transaction is recorded and propagated to the network, where all block-producing network participants must confirm it.
This is where the miners come into play. Miners enable the fundamental security of the network by providing computer power, or hash rate, to validate these transactions and blocks of data. They are compensated with newly minted bitcoins and transaction fees.
|Total supply||21 million BTC|
|Consensus||Proof of Work|
|Block time||10 minutes|
|Current block rewards||6.25 BTC|
|Mining device||ASIC miner|
|Mining channel||Bitcointalk thread|
|f2pool mining community||Reddit group|
|f2pool address||f2pool servers|
The economics of mining
There are some basic economics miners should be aware of to gain a clear understanding of the network and its revenue potential.
Bitcoin is a deflationary currency: Only 21 million bitcoin will ever be mined. Currently, more that 88% of Bitcoin’s total supply has been mined. Every ten minutes, another 6.25 BTC will be generated. Block rewards are halved every 210,000 blocks, or roughly four years.
Today, hashrate contributed by miners is usually measured in Thash/s as the basic unit. The more hashrate in the network, the more difficult it becomes to mine a block. Network difficulty adjusts itself about every 14 days to fit the ten-minute block time.
Connecting your mining machines to a mining pool can help you simplify your participation in the network and achieve more stable returns.
What hardware do I need to mine Bitcoin?
✅ Bitcoin can be efficiently mined with SHA-256 ASIC mining machines
❌ Bitcoin cannot be efficiently mined with GPU cards
💡 Some models will fluctuate between profitability and unprofitability due to changes in the bitcoin price.
Best ASIC miners.
- Designed for reliability, stability, and longevity.
- Power Consumption: 3312W +/- 10% @25℃
- Hashrate: 68 TH/s (±5%)
- Dimensions (MM): 390 (l) x 155 (w) x 240 (h)
- We Will charge 40% restock fee if return within 30 days
- Innosilicon A10 Pro 6g 720mh ETH miner is an upgraded version optimized for ETH mining 2.0, and also is the most profitable asic miner in the world now.
- We Will charge 40% restock fee if return the Innosilicon A10pro 6g 720mh within 30 days, so please make a serious consideration before purchase
- Innosilicon A10pro 6g is the most competitive asic miner , make around 90 usd per day according to 5th,Jan profit. much better than antminer S19pro 110th, and Antminer S19 95th, Antminer T19, Antminer s9, and Antminer s17+
- include Bitmain APW7 psu, Please make sure your facilities use proper cooling, dust filtration and a mininum of 10A AC cable to meet the proper operating requirements. Humidity <75%, AC voltage 210~240V, Power supply AC input current 10A, dust <0.5 Mg/m3.
- Power Consumption: 1350W(±10%, on wall, with 93% efficiency PSU, 25℃ temperature) Dimensions: (L)360mm*(W)136mm*(H)282mm Net Weight: 8.6Kg Internet connection: Ethernet Ambient Temperature: 0°C to 40°C Noise Level: 75db Fan(s): 2 Voltage: 12V
Today, after years of intense hashrate competition, only ASIC (application-specific integrated circuit) mining machines are effective for Bitcoin mining.
Basically, ASICs with unit power (calculated as total power consumption divided by total hashrate) less than 60 W/T (watts per terahash) are the mainstream rigs.
Typically, machines are operated in mining farms in parts of North America, Russia, China, and other regions that can offer low electricity prices. Lower electricity prices mean lower operating costs and better profit margins. Many mining farms provide plug-and-play solutions, including device purchasing, hosting, transportation, deployment, maintenance, and so on. Refer to our Mining Farm page for more information.
Mine more efficiently
The lower the unit power consumption compared to the hashrate, the higher the mining efficiency.
The latest ASIC models can reach unit power of about 30-40 W/T and achieve electricity cost rates of less than 50%.
For some old-gen rigs, miners sometimes have to temporarily turn their devices off or flush the firmware to underclock them for lower power consumption when the bitcoin price makes them unprofitable to run under normal conditions.
Check out the f2pool Popular Miners page for detailed information such as hashrate and power consumption for Bitcoin mining machines.
Bitcoin ASICs can also be used to mine other cryptocurrencies that use the same mining algorithm as Bitcoin. Our profit-switching service provided for the different SHA256d coins that we support can maximize your mining revenue by automatically switching to mining the most profitable coin at any given time.
How do I set up the software and create an account?
Step 1: Create a wallet address
Creating a wallet address is always the first step when diving into a new blockchain network. You’ll need a wallet address to check and receive payouts to mine Bitcoin with f2pool.
You can choose to run a full node as a wallet or use another wallet solution. An extensive list of wallet options is available on the Bitcoin.org website. You can also choose an exchange address. Note: You should always do your own due diligence when choosing a wallet provider or exchange.
Step 2: Create an f2pool account
You’ll need to create an f2pool account before mining Bitcoin. If you don’t have one yet, please click here to register.
Set a username. This will be required for configuration. You are free to create multiple subaccounts to monitor your workers/miners.
Now add your Bitcoin wallet address created in Step 1 and add enter it in your Payout Settings. You can set a payout threshold and check hashrate changes and your rewards once you start contributing mining power.
You can add or change your payout address in your Payout Settings. f2pool distributes mining revenues on a daily basis to every user who reaches the payout threshold.
Step 3: Configuration
Now that you have a wallet and an f2pool username, you can proceed to configure your mining device.
ASIC miners are the easiest mining devices to use compared to GPUs and CPUs, which are no longer profitable for mining bitcoin. No mining software is required to be run on your computer. All you need is the proper electricity set-up to meet the power consumption requirements and a reliable internet connection.
Please note that your ASICs should have a wired connection to your local network and that your computer and your ASICs should be on the same network.
Use any modern browser that accesses the IP address of your machine, then connect to an f2pool server. You’ll need to enter the following information into your mining device:
URL: The URL for the f2pool server closest to your region
Password: Enter a password of your choice
1. The list of f2pool mining pool servers is available here, as well as in the table below. Please use the server closest to your mining operation for a better connection and lower latency.
miningAccountUsername is provided in your Account Settings.
workerName is optional, but we recommend labeling each of your mining devices with a separate
workerName for more efficient monitoring.
Bitcoin mining pool servers
Ports 1314, 3333, and 25 can be used as alternative ports for each server.
A miner with the mining account username
oceanminer and a worker named
bigfish1 who wants to connect to the NA server would configure his device as follows:
ASICs take just a few steps to configure. Once you’ve configured your device and saved your settings, you’re ready to start mining and earning rewards. You are not locked into f2pool and can enter and exit the pool freely at any time. However, you will only earn mining rewards from f2pool while connected to an f2pool server.
How do I check my rewards?
Now that you’ve started mining, you can calculate the revenue your devices are generating. We’ll also give you an overview of how fees and payouts work with f2pool.
Check the block reward on-chain
Visit the Bitcoin block explorer to get a better understanding of the decentralized world you’re powering with your hashrate. Input your wallet and transaction details to find on-chain information, such as payouts from f2pool.
Calculate what you can earn
Measure your revenue
The number of coins you can earn is primarily based on how much hashrate you have. You can measure estimated daily revenues by using your Thash/s to calculate the number of coins you can mine and multiplying this number by the current exchange rate for your target currency (e.g. USD or EUR). You can use this hashrate conversion tool if you prefer other units than Thash/s.
Factors affecting profits
At a given bitcoin price, the biggest factor influencing your profits is your costs, which are highly dependent on your mining machines. In turn, electricity and the overall cost of your hardware are the main factors that influence your costs.
Mining difficulty, payout schemes, and fees can also affect your profits.
f2pool calculator tool
You can use our calculator tool to easily estimate your potential revenue from popular mining machines.
Verify your payouts from f2pool
Once your device has started mining and submitting data to the pool, you can access real-time reward records from f2pool.
View your records
As long as your miner is submitting your hashrate successfully, you will receive payouts from f2pool.
To view your real-time Bitcoin mining payout records, visit the f2pool website and sign in to view your records.
The f2pool app is also a convenient option for checking your rewards.
How f2pool calculates rewards
f2pool calculates rewards using PPS+ (Pay Per Share+) and charges 2.5% from your rewards as commission. When the coins in your account reach the minimum threshold of 0.005 BTC, you will receive a payout within 24 hours.
Details about our payout method and fees can be found here.
Increase your earnings
We want to introduce two ways to help you get the most out of your mining activities.
Merge mining is “The act of using work done on one blockchain on more than one chain.” In other words, merge mining enables you to receive mining rewards for multiple coins without adding any extra hashrate or diminishing your rewards for the primary coin you are interested in mining (such as bitcoin).
When you mine Bitcoin with f2pool, you can receive payouts from several different merge mining coins.
To receive free VCASH from mining Bitcoin, you will need to obtain a VCASH wallet address from BigONE. The reward ratio is 8 free VCASH for each bitcoin mined, with a payout threshold of 0.01 VCASH.
Bitcoin miners can get more kinds of merged mining coins after setup your wallet address in account settings.
Note: VCASH payouts can only be made when your balance is above the threshold and can only be claimed manually. Payouts for other merge mined coins will be made automatically.
There are also other merge mining coins you can add to your account. Go to your Payout Settings to set up your payout addresses for merge mined coins.
There are two more steps for enabling these rewards: 1. Verifying via SMS or two-factor authentication, and 2. Activating a link sent to the email address linked to your f2pool account.
Profit switching pool
This service provided for all SHA256d coins can maximize mining revenue by automatically switching to mining the most profitable SHA256d coin at any given time.
To join the profit switching pool:
1. Create a new f2pool account or subaccount.
2. Set separate wallet addresses for BTC, BCHN, and BSV.
3. Configure your mining device with the URL
And you’re ready to go!
Previously, miners received any BCH and BSV they mined within 24 hours. Now, if you choose to receive your mining rewards in BTC, any BCH or BSV you mine using the profit switching pool will be automatically converted to BTC within 10 minutes and you will receive it together with the BTC you mine.
If you have multiple mining machines, you can compare revenues by splitting your machines into 2 different accounts or subaccounts, one for a single SHA256d coin, and one with the SHA256d profit switching option. You will likely find that the profit switching pool will earn you slightly higher revenues because f2pool automatically takes these profitability calculations into account for you and keeps your mining as profitable as possible.
Due to the recent Bitcoin Cash hardfork, the BCH mining as part of the BTC Profit-Switching (SHA256d) pool has been suspended. BSV and BTC mining will remain available.
One more option to consider
If it is not easy for you to purchase a mining machine or spend time maintaining the hardware, there are platforms that allow you to rent hash rate. Learn how to use popular hash rate rental platform NiceHash to mine with f2pool here.